Use this monthly tracker to determine whether your commercial solar installation is reducing demand charges, not just total kilowatt-hours. It shows what to copy from the utility bill, how to compare it with interval and monitoring data, and how to separate solar savings from battery dispatch, weather, and operational changes.
Overview
Commercial electricity bills commonly contain at least two distinct variable charges: energy charges, based on the amount of electricity used over a billing period, and demand charges, based on the highest measured rate of electricity use during a defined interval. A solar array can reduce energy imported from the grid, but it only reduces demand charges when its output overlaps the interval that establishes billable demand.
That distinction explains why a business may see strong solar production and lower kilowatt-hour usage while its demand charge changes little. A short equipment startup, refrigeration cycle, electric-vehicle charging event, or air-conditioning peak can still set the monthly maximum. A battery can help by discharging during likely peaks, but only if its control settings, available state of charge, power rating, and utility tariff work together.
Use the tracker as an operating record rather than a one-time savings calculation. Start with the utility bill, confirm the bill’s demand definition, and then compare the billed result with interval data from the utility meter, inverter, energy-management system, or battery platform. For broader project economics, pair this record with a commercial solar quote comparison template.
What to track
Create one row for every billing period. Keep utility-bill figures separate from monitoring estimates; they may use different time boundaries, measurement intervals, or data-cleaning rules.
| Item | What to record | Why it matters |
|---|---|---|
| Billing dates | Start date, end date, and number of days | Allows fair comparisons when billing periods vary. |
| Energy imported | Utility kilowatt-hours and energy-charge amount | Shows savings from reduced grid energy use. |
| Billed demand | Demand kilowatts shown on the bill | Primary measure of the demand-charge outcome. |
| Demand interval | For example, the tariff’s stated measurement length | A peak lasting only briefly may not equal billed demand if the tariff averages usage over an interval. |
| Demand window | All-hours, on-peak, seasonal, weekday, or other applicable period | Solar and battery output must coincide with the relevant window. |
| Demand rate and charge | Rate unit and total demand-charge amount | Separates a change in peak kilowatts from a change in the tariff rate. |
| Solar production | Array kilowatt-hours and, where available, interval output | Confirms whether generation occurred during the business’s peak-load periods. |
| Battery activity | Charge, discharge, state of charge, and discharge power | Shows whether commercial battery peak shaving actually occurred. |
| Operational events | Weather extremes, maintenance, occupancy, production, and unusual loads | Prevents attributing every change to solar. |
Also record the tariff name and version shown on the bill or utility account. Demand terminology varies. A bill may include separate noncoincident demands, time-of-use demands, seasonal demands, or a coincident peak tied to a system-wide event. “Peak demand” in an inverter dashboard is not automatically the same measurement used for billing.
For each month, calculate two separate results:
- Energy-charge result: compare imported kilowatt-hours and energy charges with an appropriate baseline or prior comparable period.
- Demand-charge result: compare billed demand kilowatts and demand charges, while holding the applicable rate and tariff rules in view.
Do not combine these into one “solar savings” number until both components have been checked. A solar electricity bill review can help organize the energy portion, while this tracker focuses on the demand portion.
Cadence and checkpoints
At the start of each billing cycle
Confirm the current tariff, demand windows, holidays, seasonal rules, and any changes to the utility meter or account. Note planned operational changes, such as a new production shift, expanded cold storage, or scheduled equipment testing. If a battery is used, verify its target reserve, operating mode, and permitted dispatch schedule before the month begins.
After each billing period
- Download the complete utility bill, including demand-detail pages.
- Enter billed demand, demand charges, energy use, energy charges, billing dates, and rate information in the tracker.
- Export interval data covering the same dates. Preserve the original file and note the meter time zone.
- Find the interval or intervals with the highest imported load and mark whether solar was producing or the battery was discharging.
- Compare the billed peak with the highest dashboard peak. Investigate any mismatch before drawing conclusions.
- Record unusual loads, weather, outages, control changes, and maintenance events.
A simple monthly record can use these columns: billing month, billed demand kilowatts, demand rate, demand charge, highest interval timestamp, solar output at that timestamp, battery output at that timestamp, energy imported, production or occupancy notes, and follow-up action. Add a column for the tariff’s demand window if more than one demand category appears on the bill.
Quarterly review
Every three months, compare several billing periods rather than relying on one month. Review whether peaks occur at consistent times, whether the battery has enough charge before those periods, and whether demand reduction is concentrated in sunny months. Check for rate changes and confirm that the monitoring system has not lost communications or changed its reporting interval.
How to interpret changes
Solar production rises, but billed demand does not fall. The array may be producing outside the demand window, or the business’s maximum load may occur early in the morning, after sunset, or during a cloudy operating period. Solar can reduce energy imports without reducing the interval that sets demand.
Billed demand falls while solar production is modest. Look for lower occupancy, a shorter production schedule, milder weather, equipment downtime, or battery discharge. This may be a real bill reduction, but it should not be credited entirely to the solar panels.
The battery discharged, but the billed peak remained high. Check discharge power, state of charge, and timing. A battery may discharge before the actual peak, reach its power limit, reserve energy for backup, or respond to a forecast that did not match the site’s load. Also check whether the utility uses a coincident peak that cannot be identified from the facility’s load alone.
The dashboard shows a lower peak than the bill. Compare interval length, meter location, time zone, daylight-saving treatment, and whether the dashboard reports load behind the meter rather than grid import. Ask the installer, monitoring provider, or utility for clarification before changing controls.
For a basic comparison, estimate the demand-charge difference as:
Demand-charge change = (comparison demand kilowatts − current billed demand kilowatts) × applicable demand rate
This is only a screening calculation. It may not apply when the bill has multiple demand components, ratchets, minimums, taxes, fixed charges, or different seasonal rates. Treat the result as an investigative estimate, not a guaranteed saving.
When to revisit
Update the tracker every billing period and review it quarterly. Revisit the tariff assumptions immediately when the utility changes the rate schedule, demand windows, interval-data format, seasonal rules, or billing meter. Also review the record after adding major equipment, changing operating hours, expanding electric-vehicle charging, modifying HVAC controls, or commissioning a new solar inverter or battery.
Use the next monthly review to choose one action: verify a data mismatch, adjust a battery schedule, move a flexible load, request interval data, or document that the current system is performing as expected. Keep the bill, interval export, monitoring screenshot, and notes together for each period. This creates a defensible history for discussing tariff options, battery-control changes, maintenance, or future commercial solar upgrades.
If you are changing time-of-use or battery settings, review the solar battery time-of-use settings guide first, and preserve the previous settings so the effect of each change can be measured. The goal is not simply to produce more solar electricity; it is to understand when the facility’s grid demand is established and verify whether the system is reducing that specific billed event.